The Charge Time is an alarm clock with a built-in Bluetooth® speaker and Qi wireless charger. Stream audio from your Bluetooth®-enabled device through the stereo speakers or wake up to the clear display of the Charge Time. This guide will answer some of the most commonly asked questions.

Frequently Asked Questions

What's included in the box?

Right out of the box you will receive:

  • Charge Time
  • Power Adapter
  • Micro-USB cable
  • 1/8” (3.5mm) Stereo Aux cable
  • Quickstart Guide
  • Safety & Warranty Manual

[Back to Top]

How loud is the Charge Time?

The Charge Time has (2) 10 Watt speakers for a clear 20 Watts of stereo sound.

[Back to Top]

How do I set the time?

To set the time on the Charge Time:

  1. Press and hold the Clock button for 2 seconds. The hours’ digits will flash
  2. Tap the Up and Down buttons to set the desired hour.
  3. Tap the Clock button to switch to the minutes’ digits, which will flash.
  4. Tap the Up and Down buttons to set the desired minutes.
  5. Press and hold the Clock button for 2 seconds to confirm the time.

Tap the Up button to switch between 12 Hour and 24 Hour time format.

[Back to Top]

How do I use the alarm?

To set the alarm on the Charge Time:

  1. Press and hold the Alarm button for 2 seconds. The hours’ digits will flash
  2. Tap the Up and Down buttons to set the desired hour.
  3. Tap the Alarm button to switch to the minutes’ digits, which will flash.
  4. Tap the Up and Down buttons to set the desired minutes.
  5. Press and hold the Alarm button for 2 seconds to confirm the alarm time.

To snooze the alarm on the Charge Time, tap any button that is not the Alarm button when the alarm is sounding.

To turn off the Charge Time's alarm, hold the Alarm button for 2 seconds when the alarm is sounding.

To disable/enable the alarm on the Charge Time, press and hold the Down button when the alarm is not sounding.

[Back to Top]

What are the audio source options on the Charge Time?

The audio source options on the Charge Time are:

  • Bluetooth ®
  • Auxiliary
  • USB drive

[Back to Top]

How do I pair the Charge Time to my Bluetooth ® device?

To pair your Bluetooth ® device to the Charge Time:

  1. Turn on your Bluetooth ® device.
  2. If it is not already on, turn on Charge Time by connecting the power input to a power outlet using the included power adapter.
  3. If you have previously paired a Bluetooth ® device, Charge Time will reconnect automatically. If you have not connected a device previously, Charge Time will automatically enter pairing mode.
  4. Navigate to your Bluetooth ® device’s setup screen, find Charge Time and connect. NOTE: If your device requires a passcode or PIN, enter “0000
  5. The Bluetooth ® LED will light up solid when it is paired. NOTE: If your Bluetooth device is not able to connect to Charge Time, press and hold the Play/Pause button to break previous Bluetooth connections and reset the Bluetooth module.
  6. Start playback from your Bluetooth ® device.

To disconnect a connected Bluetooth ® device, press and hold the Play/Pause button.

[Back to Top]

How do I play music from a USB drive?

To play music stored on a USB drive through the Charge Time:

  1. Connect the USB drive (formatted to exFAT or FAT32) with music on it to the USB port on the back of the Charge Time labeled “USB
  2. Use the Play/Pause and Minus/Plus (-/+) buttons to control playback and volume.

[Back to Top]

Further Technical Support

Whether you are a customer or dealer, if you already own an ION Audio product, or if you just have pre-sales questions, the ION Audio technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.