Troubleshooting
If the unit is not charging: Make sure the power cable is properly connected to the USB-C® port and to a power outlet.
If the sound is distorted: Try lowering the volume control of your sound source.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If you cannot connect your audio device to KettleBoom via Bluetooth:
-
Have your audio device (e.g., smartphone or tablet) and KettleBoom as close together as possible while trying to connect. Make sure both the audio device and KettleBoom are unobstructed by walls, furniture, etc.
-
Press and hold the Source button to disconnect KettleBoom from any other audio device and restart the search process. If this does not work right away, power off KettleBoom and then power it back on. See the Pairing a Bluetooth® Device section for more information.
-
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You can find this under the Bluetooth menu in the Settings for your phone or other audio device.
If this does not work, and you have connected to KettleBoom before, find KettleBoom in the list of available or previously connected devices in your audio device's Bluetooth menu, tap the "gear" or “i” icon located next to it and then select Unpair or Forget. Turn KettleBoom off and back on and try pairing again once it reappears in your available devices list.
Note: If KettleBoom has been paired to another audio device recently that is still within range, you may need to repeat this process with that audio device to fully disconnect.
|
